webelectrical.net

Service Agility Networks Logistics. 1-800-843-6036

Sidebar
Menu

150W FM Exciter Transmitter XE150 Eddystone

The XE150 is a highly advanced, fully featured broadcast FM exciter that is also ideally suited for use as a low power stand alone transmitter. Use of wideband design techniques means that frequency setting is easily achieved from soft keys on the front panel with no further tuning required. This facility may be password protected. 150 Watt Watts FM Broadcast Transmitter Transmitters Exciter Exciters.

The frequency can also be remotely controlled if needed via the RS232 or TCP/IP ports on the rear of the unit. The XE150 uses an ultra linear modulator to give superb sound reproduction with freedom from overshoots and artefacts. The modulator also features a precision TCXO for exceptional frequency stability. Low Power FM Transmitter Transmitters Exciter Exciters 150W XE150 Eddystone.

The PA Section in the XE150 uses the world renowned heat dissipating “fresh-air-tunnel” concept. The fan provides cooling to the specially designed heat sink with a stream of air that needs no filtering, saving on routine filter replacements. It will operate into any load without damage thanks to its VSWR cut back circuit that protects the power amplifier stage from adverse operating conditions. 150 Watt Watts 150W FM Broadcast Transmitter Exciter.

The XE150 front panel metering shows forward and reflected power together with internal voltages, temperature and the modulation level. Quick view LED’s show advanced status information including CPU ok, system normal, modulation fault and external mute. Low Power FM Broadcast Transmitter Exciter 150W 150 Watt Watts Transmitters Exciters.

150W FM Exciter Transmitter XE150 Eddystone

150W FM Exciter Transmitter XE150 Eddystone XE150 is a highly advanced, fully featured broadcast FM exciter that is also ideally suited for use as a low power stand alone transmitter. Use of wideband design techniques means that frequency setting is easily achieved from soft keys on the front panel with no further tuning required. This facility may be password protected. 150 Watt Watts FM Broadcast Transmitter Transmitters Exciter Exciters.

Pasted Graphic stacks_image_24_1

The PA section also has LEDs when show Forward, Reverse, temperature and CPU status. The addition of the unique modulation alarm, gives broadcasters alarm status outputs and indications that will show loss of audio or over modulation. A front panel monitor point for RF output is provided, as is a fully buffered baseband monitor for accurate monitoring of the modulator input. 150 Watt Watts FM Broadcast Transmitter Transmitters Exciter Exciters.

The rear panel includes a remote control/monitoring socket that allows carrier muting and status signalling to an external system, additionally data sockets are provided for use with systems that have the ability to control exciters via RS232 or TCP/IP, these sockets are also used for programming advanced features within the XE150. Low Power FM Transmitter Transmitters Exciter Exciters 150W XE150 Eddystone.

The XE150 is fully compatible with N+1 systems, with remote frequency selection being achieved by either RS232/TCPIP interface or rear panel logic selection of up to 6 preset frequencies. Very conservatively rated components and a switch mode power supply are used to ensure extremely high reliability and to give good efficiency. 150 Watt Watts 150W FM Broadcast Transmitter Exciter.

A comprehensive range of input options is available. The XE150 has a composite input and 3 SCA/RDS inputs. The XE150/S includes a stereo limiter and stereo encoder, the AES/EBU input version allows for a stereo digital input and the XE150/RBRX includes a rebroadcast receiver for translator/rebroadcast applications. Low Power FM Broadcast Transmitter Exciter 150W 150 Watt Watts Transmitters Exciters.

Frequency range
Frequency stability
Power output
Harmonic & spurious
Spurious outputs
AM noise
Input sensitivity
MPX response
AF THD (multiplex version)
Power supply (AC)
Temperature (operating)
Humidity (operating)
Dimensions
Weight
Warranty

87.5 to 108MHz in 50kHz steps
< ± 200Hz
>160W (adjustable)
< -70dBc (30MHz to 1GHz)
< -100dBc (87.5MHz to 137MHz @ fc± 0.5MHz)
< 0.5% @ ± 40kHz deviation
+ 8dBu (adjustable) for ± 75kHz deviation
< ± 0.5dB (5Hz - 100kHz)
< 0.15% @ ± 75kHz deviation
90 - 264v, 47 - 63Hz
-20C to 55C
< 95% RH, non condensing
2U with 550mm intrusion to rack (inc. connectors)
14kg
5 Years

In line with our policy of continual development, we reserve the right to alter specifications without notice.

150W FM Exciter Transmitter XE150 Eddystone

The XE150 is a highly advanced, fully featured broadcast FM exciter that is also ideally suited for use as a low power stand alone transmitter. Use of wideband design techniques means that frequency setting is easily achieved from soft keys on the front panel with no further tuning required. This facility may be password protected. 150 Watt Watts FM Broadcast Transmitter Transmitters Exciter Exciters.

150W FM Exciter Transmitter XE150 Eddystone
RVR FM BROADCAST EQUIPMENT

***Prices are subject to change without notice.  Inventory is subject to prior sale.  Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product. Not Responsible for errors in print, verify all data with us or manufacturer.  Terms & Conditions of sale apply, for a copy contact us. Products may be discontinued without notice.  Pricing Does Not Include Freight Costs.  All trademarks and patents remain the property of their respective holders, and are used only to directly describe the products being provided. Minimum Order quantities may apply. Brands and product names are trademarks or registered trademarks of their respective companies.